Air compressor dryer systems regeneration compressed air dryer
- Model
- SLAD-6NF
Item specifics
- Air inlet temperature
- ≤60°C
- Cooling way
- Air-cooled
- Ambient temperature
- ≤38°C
- Pressure dew point
- 2~10°C
- Air inlet pressure
- 0.6~1.0MPa
- Pressure loss
- ≤3% of inlet pressure
- Place of origin
- Hangzhou, China
- Configuration
- Stationary
- Warranty
- 1 year
- Color
- depend on requirement
Review
Description
Features
1. Max air inlet temp:50℃;
2. Economic and convenient,no water system required;
3. Highly efficient moisture separation with patented design water separator;
4. Patented design in water separator which 99.9%water be separated;
5. Refrigerant compressor: Danfoss, Performer, Bitzer, Copeland, Maneurop, Fusheng;
6. Refrigerant control: Danfoss, Emerson, Sprolan;
7. Low noise,running stable,energy saving and long life;
8. Real time display operating parameters.
| Refrigerated Compressed Air Dryer | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Model | Flow Capacity (Nm3/min) | Voltage (V) | Fan Power (W) | Pipe Diameter | Air Inlet Pressure (Mpa) | Net Weight (Kg) | Length (mm) | Width (mm) | Height (mm) | Air Flow (N3/h) |
| SLAD-0.5NF | 0.65 | 220 | 1x50 | G1" | 0.6-1.0 MPa | 40 | 450 | 500 | 670 | 745 |
| SLAD-1NF | 1.2 | 220 | 1x50 | G1" | 50 | 450 | 500 | 670 | 745 | |
| SLAD-2NF | 2.5 | 220 | 1x100 | G1" | 85 | 500 | 500 | 780 | 1330 | |
| SLAD-3NF | 3.6 | 220 | 1x125 | G1" | 90 | 500 | 500 | 880 | 1800 | |
| SLAD-4.5NF | 5 | 220 | 1x240 | G1 1/2" | 120 | 710 | 550 | 1100 | 3800 | |
| SLAD-6NF | 6.8 | 220 | 2x150 | G1 1/2" | 130 | 700 | 550 | 1170 | 3800 | |
| SLAD-8NF | 8.5 | 220 | 2x195 | G2" | 160 | 770 | 600 | 960 | 5340 | |
| SLAD-10NF | 10.9 | 380 | 2x195 | G2" | 200 | 820 | 700 | 1040 | 7600 | |
| SLAD-12NF | 12.8 | 380 | 2x195 | G2" | 200 | 820 | 700 | 1040 | 7600 | |
| SLAD-15NF | 16 | 380 | 2x190 | DN65 | 310 | 1460 | 750 | 1604 | 7600 | |
| SLAD-20NF | 22 | 380 | 2x240 | DN65 | 410 | 1670 | 800 | 1623 | 9000 | |
| SLAD-25NF | 26.8 | 380 | 2x240 | DN80 | 540 | 1820 | 800 | 1673 | 9000 | |
| SLAD-30NF | 32 | 380 | 2x380 | DN80 | 640 | 1900 | 860 | 1855 | 12500 | |
| SLAD-40NF | 43.5 | 380 | 3x240 | DN100 | 740 | 2200 | 930 | 1920 | 13500 | |
| SLAD-50NF | 53 | 380 | 3x380 | DN100 | 880 | 2450 | 900 | 2090 | 18750 | |
| SLAD-60NF | 67 | 380 | 4x380 | DN125 | 1010 | 2140 | 1450 | 1767 | 30000 | |
| SLAD-80NF | 90 | 380 | 4x550 | DN125 | 1300 | 2070 | 1600 | 1986 | 45000 |
1. By-bass valve. Some domestic suppliers don't have it.
2. 3-stage separation patented design in water separator. Direct colliion type, low speed centifugation and stainless wire demist. The result is 99% separation efficiency.
3. Heat exchanger design. The finished air and inlet air make heat exchange in it and make the finished air a better temperature for the final use. Some supplier omit this step.
Email:jovelyzou@hzsljh.com
website: www.slairdryer.com
