New product high quality of blower purge desiccant air dryer
- Model
- SDXG-80I
Item specifics
- Air inlet temperature
- 5-45°C
- Air inlet prseeure
- 0.6-1.0MPa
- Air consumption
- 0
- Pressure dew point
- -40°C (standard type)
- Inlet oil content
- <=0.1PPM
- Pressure loss
- ≤3% of inlet pressure
- Place of origin
- Hangzhou, China
- Certification
- CE CCC ISO9001
- Power
- PLC control
- Color
- Depend on your requirement
Review
Description
Features
●High efficient and energy saving;
●Lower dew point;
●Less gas consumption;
●Less pressure loss;
●Quality switch valves with high stable and reliable;
●Special air diffusion & automatic regeneration to extend desiccant life time;
●Highly reliable programmable logic control (PLC);
●Three-stage drainage features.
Working Principle
For added energy savings, it uses a high efficiency blower to take in ambient air required during the heat regeneration cycle to desorb moisture from the desiccant, no compressed air is used during this phase.
Dry compressed air is used during the dry air cooling regeneration period for reduced heat and dew point spike at tower switchover. This amounts to an average process air use of 3% of the rated capacity of the dryer.
| Technical Specification of Zero Purge Consumption Type | |||||||||
| Model | Air Capacity | Connection Diameter | Heater Power | Blower Power | Blower Fan | Desiccant Weight | Equipment Weight | Device Size | |
| (Mm3/min) | cfm | （KW） | （KW） | (Nm/min) | (kg) | (kg) | （mm） | ||
| SDXG-10I | 10.9 | 384 | DN50 | 8 | 1.3 | 2.4 | 311 | 1300 | 1850×950×2400 |
| SDXG-15I | 16 | 564 | DN65 | 10 | 1.3 | 2.4 | 486 | 1550 | 1950×1000×2440 |
| SDXG-20I | 22 | 775 | DN65 | 12 | 1.75 | 3.6 | 606 | 2000 | 2110×1100×2470 |
| SDXG-25I | 26.8 | 945 | DN80 | 15 | 1.75 | 3.6 | 716 | 2200 | 2200×1200×2510 |
| SDXG-30I | 32 | 1128 | DN80 | 18 | 2.2 | 5.2 | 860 | 2350 | 2200×1300×2510 |
| SDXG-40I | 43.5 | 1533 | DN100 | 22 | 2.2 | 5.2 | 1158 | 2900 | 2400×1500×2520 |
| SDXG-50I | 53 | 1868 | DN100 | 27 | 5.5 | 7.8 | 1520 | 3450 | 2750×1550×2850 |
| SDXG-60I | 67 | 2361 | DN125 | 36 | 5.5 | 9.2 | 1710 | 3900 | 2750×1650×2850 |
| SDXG-80I | 90 | 3172 | DN125 | 42 | 7.5 | 9 | 2436 | 5400 | 2724×2146×2940 |
| SDXG-100I | 110 | 3877 | DN150 | 54 | 13 | 14.2 | 3220 | 6000 | 3600×2150×3200 |
| SDXG-120I | 130 | 4582 | DN150 | 72 | 13 | 14.2 | 3842 | 6900 | 3900×2250×3400 |
| SDXG-150I | 160 | 5639 | DN200 | 84 | 13 | 19 | 5288 | 9500 | 4300×2400×3500 |
| SDXG-200I | 210 | 7402 | DN200 | 96 | 20 | 32 | 7008 | 14500 | 4800×2600×3850 |
| ...... | |||||||||
1. The gross (i.e. the weight of the product and packaging - that is, the total weight), tare (i.e. the weight of the packaging without any contents) and net (i.e. the weight of the product only) weights of the carg;
2. The nature, quality and specifications of the product being shipped;
3. The type of package (such as pallet, box, crate, drum, carton, etc.);
4. The measurements/dimensions of each package;
5. The number of pallets/boxes/crates/drums, etc.;
6. The contents of each pallet or box (or other container).
