Shanli

Shanli will attend two exhibitions this year:1. Hannover Messe in Germany during 1-5 Apr,2019, welcome to our booth in Hall26 D73-3.2. PCVExpo in Russia in October, 2019.

Over 31 patents which is the most in China airdryer industry.

Shanli provide a comprehensive range of purification equipment, has a big market share in China.    ●Established in 1997   ●New workshop covers 30, 000 M2   ●Over 300 professional staff   ●CE and ISO9001:2008 certification   ●The most 31 patents among the industry   ●Annualoutput of 12,000 sets of equipment   ●Export to 100 different countries

 Why to choose Shanli?（1）Strong technical force, 26 professional engineers, with 31 product patents, domestic and overseas service-solving capabilities（2）Comprehensive Product LineStable low dew point refrigerated dryer, energy saving desiccant dryer. Big capacity dryer production capability（3）More than 20 years industry experience, domestic market share about 10%, workshop of 30000m2（4）Long term and stable cooperation with famous air compressor supplier, Atlas copco, Ingersoll rand, Boge, Compair and Fusheng.

When compressing air, liquid is also brought into the air stream.  When cooling, that liquid condenses and is delivered with the compressed air to your tool or application.  There are a number of ways of removing or reducing the amount of liquid in the air stream.  These include:Storage Tank Cooling MethodAfter-coolingAir-cooled Water Cooled Absorption Drying

A compressed air dryer is a machine that sucks in and significantly reduces the moisture content of ambient air. In manufacturing, air dryers serve the vital role of rendering air more sanitary and conducive for workers and products alike. Depending on the moisture levels of a given environment, the use of a compressed air system can make all the difference between whether or not a production is even achievable. Shanli Compressed air dryers can be split into the following categories:Refrigerated drying units:Non-cyclingDesiccant drying units: HeatlessHeated —blower desiccant or heat of compression desiccant

1、Switch on the electricity power and close the air switch. At this time, the power indication light (red) will be on.2、As to the water-cooled dryer, open the inlet and outlet valve of the cooling water.3、Press the green start button; then wait till the start indication lamp(Green) lightsfor 5 minutes, the compressor begins to work. The run indication lamp (Green) lights.4、Check the compressor works normally without any noises. As to R22 refrigerant, thenormal reading range of the refrigerant LP pressure is between 0.3 and 0.5MPa.5、If everything is normal, open the air compressor and the inlet and outlet check valveto transmit the compressed air into the dryer; and meanwhile close the by-pass valve.At this moment, the air outlet pressure will be showed by the air pressure gauge.6、Observe the working performance for 5 to 10minutes,the designed 2-10℃ pressure dewpoint can be reached. And meanwhile, the normal high pressure and low pressure ofrefrigerant reading are as below.Low pressure of refrigerant: R22 and R407C 0.3～0.5MPa R134A 0.1～0.3MpaHigh pressure of refrigerant: R22 and R407C 1.2～1.8MPa R134A 0.7～1.1Mpa7、Open the copper ball valve on the automatic drainage slowly to discharge all thecondensed water.

Spring Festival holiday is our Traditional festival . We start the holiday on February 13th to February 23rd.

1.1 Air flow fluid distribution is not balanced, there is adsorption dead angle, adsorbent utilization is low;1.2 Adsorbent varieties and filling problems, not easy to achieve uniform, close, do not stay dead, leading to short-circuit airflow;1.3 "tunnel effect" to promote the destruction of adsorbent powder;

1.1 Air flow fluid distribution is not balanced, there is adsorption dead angle, adsorbent utilization is low;1.2 Adsorbent varieties and filling problems, not easy to achieve uniform, close, do not stay dead, leading to short-circuit airflow;1.3 "tunnel effect" to promote the destruction of adsorbent powder;

1, compressed air quality standards, he knows?2, compressed air quality testing methods and equipment, he knows?3, consumers in the compressed air quality of the industry and the equipment used by the standard he knows?4, if we tell him the quality standards, free to help him detect whether he is willing?

We will show Nomal temperature air-cooled SLAD-4.5NF and SALD series heatless desiccant  SLAD-1WXF.

Foreign trade department of the two colleagues have been scheduled for October to Russia air tickets. Since 10.21-28，This time is used to attend theMoscow PCVExpo and visit our customer.

We can design equipment according to customer's condition and technology,Until the customer is satisfied with the program. Our products are guaranteed for 18 months，We also have overseas engineer services.