Water freezing refrigerated air dryer to Berlin
Use louvred flat tube condenser, provide lightweight, compact, highest efficiency and increased service life.
Model:SLAD-40NW
Use louvred flat tube condenser, provide lightweight, compact, highest efficiency and increased service life.
Model:SLAD-40NW
The air to air heat exchange cool down the inlet air temperature before going into the evaporator
Model:SLAD-40NW
Heat to cold air that is returning from evaporator, avoid the outlet pipe condensated.
Model:SLAD-40NW
Zero Air Loss level controlled condensate drain prevents energy loss
Model:SLAD-40NW
The costs are split equally between electricity costs, flow resistances in the system and compressed air losses through leaks.
Model:SLAD-40NW
Compressed-air drying without heat utilisation at very good refrigeration COPs
through largely subcritical process management
Model:SLAD-40NW
Compressed -air drying with simultaneous thermal and process heat provision up to 90 °C (cold-heat-coupling) with heat recovery
Model:SLAD-40NW
If desired, heating capacities from 110 to 300 kW can be decoupled at supply flow temperatures of up to 90 °C
Model:SLAD-40NW
The water-cooled design is standard.refrigerated air dryer
Model:SLAD-40NW
By using the natural refrigerant R744 (CO2), there is no need to comply with the requirements
Model:SLAD-40NW
eco-friendly CO2 Compressed air refrigeration dryers is a globally unique innovation for compressed air dehumidification
Model:SLAD-40NW
Simplified refrigeration circuit since hot gas bypass valves are not required
Model:SLAD-40NW
Pressure dew point range is also the lowest achievable with a refrigerated design since the condensate will begin to freeze.
Model:SLAD-40NW
This range permits the pressure dew point to fall within limits that are achievable with common refrigeration system controls.
Model:SLAD-40NW