32Nm3/min Waer Cooling Combined Dryer SDZF-30,compressed air cooled air dryer
Patented design in water separator: 99.9% water be separated
Model:SDZF-30
Patented design in water separator: 99.9% water be separated
Model:SDZF-30
US $600
Model:SLAD-6NF
US $600
Model:SLAD-6NF
US $600
Model:SLAD-6NF
a larger particle size (1/4” or more) is used as a buffer zone at the inlet
Model:SLAD-15MXF
In some cases, more than one desiccant type can be used for special drying applications.
Model:SLAD-15MXF
energy saving capacity can be further improved by activating the system, an advanced technology of the microprocessor control
Model:SLAD-0.5NF
Offered in a wide range of sizes from 5 m3/h to 400 m3/h, with the dew points of -40 Deg C.
Model:SDCM-6J
if the inlet conditions, airflow, pressure or ambient temperatures vary, the quantity of the water loading will also vary
Model:SLAD-8NF
This is positioned above the carburetor or throttle body, usually in a metal or plastic container
Model:SAGL-4.5*
hese exclusive compressed air dryers combine reliability, cutting-edge design, and innovative packaging into a unit.
Model:SLAD-8NF
To protect your piping, tools and equipment, it’s best to use a compressed air dryer to dry the air.
Model:SLAD-8NF
The compressed air is completely separated providing lowest pressure loss, less desiccant consumption and extend lifetime.
Model:SLAD-15MXF
Low running cost, low pressure drop and steady dew point
Model:SLAD-350NW