Hangzhou Shanli Purify Equipment Corporation

SLAD-600HTW China supply IRIngsoran refrigerated air dryers for screw air compressor system

Group	Refrigerated air dryer
Min. Order	1 unit
Terms of Payment	L/C, T/T
Update Time	2017-12-18

Item specifics

Air inlet temperature	≤80°C
Cooling way	Water-cooled
Cooling Water Inlet Temperature	≤32°C
Pressure dew point	2~10°C
Air inlet pressure	0.6~1.0MPa
Pressure loss	≤3% of inlet pressure
Place of origin	Hangzhou, China
Certification	CE CCC ISO9001
Lubrication Style	Lubricated
Warranty	1 year

Description

Features

1. Water-cooled and suitable for high temperature;

2. High-efficiency & compact heat exchanger in Countercurrent design;

3. Highly efficient moisture separation with patented design water separator;

4. Refrigerant compressor: Danfoss, Performer, Bitzer, Copeland, Maneurop, Fusheng;

5. Refrigerant control: Danfoss, Emerson, Sprolan;

6. Real time display operating parameters.

High Temperature Type
Water-cooled Refrigerated Air Dryer
Model	Capacity		Voltage (V)	Cooling Water Circulation Volume (Nm3/h)	Air Pipe Diameter	Cooling Water Pipe Diameter	Net Weight (Kg)	Length (mm)	Width (mm)	Height (mm)
Model	(Nm3/min)	cfm	Voltage (V)	Cooling Water Circulation Volume (Nm3/h)	Air Pipe Diameter	Cooling Water Pipe Diameter	Net Weight (Kg)	Length (mm)	Width (mm)	Height (mm)
SLAD-6HTW	6.8	240.3	220	2	G1 1/2"	R3/4"&R1"	260	1200	780	923
SLAD-8HTW	8.5	300.4	220	3.2	G2"	R1"	270	1100	800	1200
SLAD-10HTW	10.9	385.2	380	3.6	G2"	R1"	280	1200	950	1148
SLAD-12HTW	12.8	452.3	380	4.8	G2"	R1"	280	1200	950	1148
SLAD-15HTW	16	565.4	380	6	DN65	R1 1/2"	340	1380	1170	1393
SLAD-20HTW	22	777.4	380	7.2	DN65	R1 1/2"	470	1500	1150	1443
SLAD-25HTW	26.8	946.9	380	9.2	DN80	R1 1/2"	610	1850	1250	1413
SLAD-30HTW	32	1130.7	380	11.2	DN80	R1 1/2"	720	1500	1300	1555
SLAD-40HTW	43.5	1537.1	380	14.2	DN100	R1 1/2"	860	1920	1320	1585
SLAD-50HTW	53	1872.8	380	19.2	DN100	R1 1/2"&R2"	1090	2230	1350	1585
SLAD-60HTW	67	2367.5	380	21.6	DN125	R1 1/2"&R2"	1390	2140	1500	1767
SLAD-80HTW	90	3180.2	380	24.6	DN125	R1 1/2"&R2"	1950	2130	1800	1986
SLAD-100HTW	110	3887	380	29.2	DN150	R2"	2600	2440	1780	1976
SLAD-120HTW	130	4582	380	32.4	DN150	R2"	2900	2610	1960	2146
SLAD-150HTW	160	5639	380	37.2	DN200	R2 2/1"&R3"	3200	2980	2260	2374
SLAD-200HTW	210	7402	380	48.8	DN200	R2 2/1"&R3"	3700	3370	2160	2426
SLAD-250HTW	260	9164	380	60.4	DN250	R3"	3880	3660	2600	2714
SLAD-300HTW	315	11102	380	72	DN250	R3"	4300	3760	2410	2560
SLAD-350HTW	350	12336	380	79	DN300	R3"	4200	4060	2660	3009
SLAD-400HTW	400	14098	380	97.6	DN300	R4"	4370	4260	2660	3009
SLAD-450HTW	450	15860	380	109.2	DN350	R4"	4700	4600	2800	3059
SLAD-500HTW	500	17623	380	120.8	DN350	R4"	4900	4900	2800	3059
SLAD-550HTW	550	19385	380	132.4	DN400	DN125	5300	4900	2970	3209
SLAD-600HTW	600	21147	380	144	DN400	DN125	5500	4900	3070	3309
......

1. By-bass valve. Some domestic suppliers don't have it.

2. 3-stage separation patented design in water separator. Direct colliion type, low speed centifugation and stainless wire demist. The result is 99% separation efficiency.

3. Heat exchanger design. The finished air and inlet air make heat exchange in it and make the finished air a better temperature for the final use. Some supplier omit this step.