Blower purge adsorption air dryer

Name: Blower purge adsorption air dryer
Brand: SHANLI
SKU: 18104396
Rating: 4.75 (10 reviews)

Model: SDXG-80I

Item specifics

Air inlet temperature: 5-45°C

Air inlet prseeure: 0.6-1.0MPa

Air consumption: 0

Pressure dew point: -40°C (standard type)

Inlet oil content: <=0.1PPM

Pressure loss: ≤3% of inlet pressure

Place of origin: Hangzhou, China

Certification: CE CCC ISO9001

Power: PLC control

Color: Depend on your requirement

Review

Description

adsorption air dryer

Features

●1.The inlet and outlet temperature difference of pre-cooler is 3 C, which is much more better than the similar products and minimize the outlet relative humidity and avoid condensation in the pipings.

●2.Outlet compressed air relative humidity is low, the below air pipe surface without Condensation phenomenon.

The pre-coolerreclaim nearly 90% compressed air, and greatly reduces the evaporator load, so the power consumption of the refrigerant compressor is low, only 70% of the normal one.

●3.Friendly refrigerant is adopted for all series dryers.

Security and Reliability

Multiple overload protection.

Newest CE certificate.

Working Principle

For added energy savings, it uses a high efficiency blower to take in ambient air required during the heat regeneration cycle to desorb moisture from the desiccant, no compressed air is used during this phase.

Dry compressed air is used during the dry air cooling regeneration period for reduced heat and dew point spike at tower switchover. This amounts to an average process air use of 3% of the rated capacity of the dryer.


Technical Specification of Zero Purge Consumption Type
Model	Air Capacity		Connection Diameter	Heater Power	Blower Power	Blower Fan	Desiccant Weight	Equipment Weight	Device Size
	Air Capacity			Heater Power	Blower Power	Blower Fan	Desiccant Weight	Equipment Weight	Device Size
	(Mm3/min)	cfm		（KW）	（KW）	(Nm/min)	(kg)	(kg)	（mm）
SDXG-10I	10.9	384	DN50	8	1.3	2.4	311	1300	1850×950×2400
SDXG-15I	16	564	DN65	10	1.3	2.4	486	1550	1950×1000×2440
SDXG-20I	22	775	DN65	12	1.75	3.6	606	2000	2110×1100×2470
SDXG-25I	26.8	945	DN80	15	1.75	3.6	716	2200	2200×1200×2510
SDXG-30I	32	1128	DN80	18	2.2	5.2	860	2350	2200×1300×2510
SDXG-40I	43.5	1533	DN100	22	2.2	5.2	1158	2900	2400×1500×2520
SDXG-50I	53	1868	DN100	27	5.5	7.8	1520	3450	2750×1550×2850
SDXG-60I	67	2361	DN125	36	5.5	9.2	1710	3900	2750×1650×2850
SDXG-80I	90	3172	DN125	42	7.5	9.6	2660	5500	3450×2000×3100
SDXG-100I	110	3877	DN150	54	13	14.2	3220	6000	3600×2150×3200
SDXG-120I	130	4582	DN150	72	13	14.2	3842	6900	3900×2250×3400
SDXG-150I	160	5639	DN200	84	13	19	5288	9500	4300×2400×3500
SDXG-200I	210	7402	DN200	96	20	32	7008	14500	4800×2600×3850
......

Our Company

Shanli is a CE and ISO 9001:2008 certificated leading air dryer manufacture in China with more than 20 year experience

with the most 26 patents.Shanli has been the supporting supplier for Atlas,Boge and Ingersoll Rand.We are already

make export to 20 different countries and worldwide as active, mainly Middle East and Europe.

1. The gross (i.e. the weight of the product and packaging - that is, the total weight), tare (i.e. the weight of the packaging without any contents) and net (i.e. the weight of the product only) weights of the carg;

2. The nature, quality and specifications of the product being shipped;

3. The type of package (such as pallet, box, crate, drum, carton, etc.);

4. The measurements/dimensions of each package;

5. The number of pallets/boxes/crates/drums, etc.;

6. The contents of each pallet or box (or other container).