Shanli normal temperature SLAD-6NF industrial air dryer for compressor
- Model
- SLAD-6NF
Item specifics
- Air inlet temperature
- ≤45°C
- Cooling way
- Air-cooled
- Ambient temperature
- ≤38°C
- Pressure dew point
- 2~10°C
- Air inlet pressure
- 0.6~1.0MPa
- Pressure loss
- ≤3% of inlet pressure
- Place of origin
- Hangzhou, China
- Configuration
- Stationary
- Warranty
- 1 year
- Color
- depend on requirement
Review
Description
Capacity: 0.6~100 m3/min
| Model | (Nm3/min) | (m3/h) | (cfm) | Equipment net weight（kg） | length(mm) | wide | high | Compressor Power | Refrigerant | Pipe Diameter |
|---|---|---|---|---|---|---|---|---|---|---|
| SLAD-0.5NF | 0.65 | 39 | 23 | 40 | 450 | 500 | 670 | 215W | R134a | G1" |
| SLAD-1NF | 1.2 | 72 | 42 | 50 | 450 | 500 | 670 | 304W | R134a | G1" |
| SLAD-2NF | 2.5 | 150 | 88 | 85 | 500 | 500 | 780 | 520W | R134a | G1" |
| SLAD-3NF | 3.6 | 216 | 127 | 90 | 500 | 500 | 880 | 738W | R407C | G1" |
| SLAD-4.5NF | 5 | 300 | 176 | 120 | 700 | 550 | 1100 | 961W | R407C | G1 1/2" |
| SLAD-6NF | 6.8 | 408 | 240 | 130 | 700 | 550 | 1170 | 1152W | R407C | G1 1/2" |
| SLAD-8NF | 8.5 | 510 | 300 | 160 | 770 | 600 | 960 | 1407W | R407C | G2" |
| SLAD-10NF | 10.9 | 654 | 384 | 200 | 820 | 700 | 1040 | 2182W | R407C | G2" |
| SLAD-12NF | 12.8 | 768 | 451 | 200 | 820 | 700 | 1040 | 2182W | R407C | G2" |
| SLAD-15NF | 16 | 960 | 564 | 310 | 1460 | 750 | 1604 | 2182W | R407C | DN65 |
| SLAD-20NF | 22 | 1320 | 775 | 410 | 1670 | 800 | 1623 | 4.1KW | R407C | DN65 |
| SLAD-25NF | 26.8 | 1608 | 945 | 540 | 1820 | 800 | 1673 | 4.89KW | R407C | DN80 |
| SLAD-30NF | 32 | 1920 | 1128 | 640 | 1900 | 860 | 1855 | 5.32KW | R407C | DN80 |
| SLAD-40NF | 43.5 | 2610 | 1533 | 740 | 2200 | 930 | 1920 | 7.83KW | R407C | DN100 |
| SLAD-50NF | 53 | 3180 | 1868 | 880 | 2450 | 900 | 2090 | 9.02KW | R407C | DN100 |
| SLAD-60NF | 67 | 4020 | 2361 | 1010 | 2140 | 1450 | 1767 | 10.52KW | R407C | DN125 |
| SLAD-80NF | 90 | 5400 | 3172 | 1300 | 2070 | 1600 | 1986 | 17.03KW | R407C | DN125 |
| SLAD-100NF | 110 | 6600 | 3877 | 2000 | 2700 | 1600 | 1996 | 18.56KW | R407C | DN150 |
Working pressure: ≤1.6 MPa (16 barg)
Max.inlet temperature: 60℃
Max.Ambient temperature: 50℃
Min.ambient temperature: 5℃
Cooling type: air-cooled
Power supply: 220V/1Ph/50Hz or 60Hz
Refrigerant: R134a /R407C
*Rated condition:
Working pressure 0.7MPa,
Inlet temperature 45℃,
Ambient temperature 38℃,
PDP 2-10℃.
When the working pressure > 1.6Mpa,
The electrical drain need to be replaced.
Sturdy and durable
Different from Carbon steel material product.
Using 304S stainless steel for heat exchanger, water separator and air connections can avoid the secondary pollution to air quality, so the SSD series dryer can be directly used for food ,medicine, semiconductor, senior spraying field and etc.
Nano anticorrosive coating on air condenser makes the useful life longer.
Energy saving and environmental protection
Heat exchanger is following Europe and America advanced plate-fin structure, highly heat-efficiency;
The inlet and outlet temperature difference of pre-cooler is 3-5℃, which is much more better than the similar products and minimize the outlet relative humidity and avoid condensation in the pipings.
Outlet compressed air relative humidity is low, the below air pipe surface without Condensation phenomenon.
The pre-coolerreclaim nearly 90% compressed air, and greatly reduces the evaporator load, so the power consumption of the refrigerant compressor is low, only 70% of the normal one.
Friendly refrigerant is adopted for all series dryers.
Security and Reliability
Multiple overload protection.
Newest CE certificate.
Best Regard,
Anson Charlie
Shanli Purify Equipment Corporation
The biggest air dryer manufacturer in China!
Add: No.8 Zhangshan RD,Renhe Town,Hangzhou City,China 311107
Tel:+86 571 86392999(Ex126)
Email:jovelyzou@hzsljh.com
website: www.slairdryer.com
Refrigerated Dryer/Adsortion Dryer/Filters/Water Chiller
