Air-cooled compressor air dryer system (SLAD-100NF) air compressor parts dryer
- Model
- SLAD-100NF
Item specifics
- Air inlet temperature
- ≤45°C
- Cooling way
- Air-cooled
- Ambient temperature
- ≤38°C
- Pressure dew point
- 2~10°C
- Air inlet pressure
- 0.6~1.0MPa
- Pressure loss
- ≤3% of inlet pressure
- Place of origin
- Hangzhou, China
- Configuration
- Stationary
- Warranty
- 1 year
- Color
- depend on requirement
Review
Description
Features
1. Max air inlet temp:50℃;
2. Economic and convenient,no water system required;
3. Highly efficient moisture separation with patented design water separator;
4. Patented design in water separator which 99.9%water be separated;
5. Refrigerant compressor: Danfoss, Performer, Bitzer, Copeland, Maneurop, Fusheng;
6. Refrigerant control: Danfoss, Emerson, Sprolan;
7. Low noise,running stable,energy saving and long life;
8. Real time display operating parameters.
Refrigerated Compressed Air DryerModel Flow Capacity (Nm3/min) Voltage (V) Fan Power (W) Pipe Diameter Air Inlet Pressure (Mpa) Net Weight (Kg) Length (mm) Width (mm) Height (mm) Air Flow (N3/h) SLAD-0.5NF0.652201x50G1"0.6-1.0 MPa 40450500670745SLAD-1NF1.22201x50G1"50450500670745SLAD-2NF2.52201x100G1"855005007801330SLAD-3NF3.62201x125G1"905005008801800SLAD-4.5NF52201x240G1 1/2"12071055011003800SLAD-6NF6.82202x150G1 1/2"13070055011703800SLAD-8NF8.52202x195G2"1607706009605340SLAD-10NF10.93802x195G2"20082070010407600SLAD-12NF12.83802x195G2"20082070010407600SLAD-15NF163802x190DN65310146075016047600SLAD-20NF223802x240DN65410167080016239000SLAD-25NF26.83802x240DN80540182080016739000SLAD-30NF323802x380DN806401900860185512500SLAD-40NF43.53803x240DN1007402200930192013500SLAD-50NF533803x380DN1008802450900209018750SLAD-60NF673804x380DN125101021401450176730000SLAD-80NF903804x550DN125130020701600198645000 |
|---|
1. By-bass valve. Some domestic suppliers don't have it.
2. 3-stage separation patented design in water separator. Direct colliion type, low speed centifugation and stainless wire demist. The result is 99% separation efficiency.
3. Heat exchanger design. The finished air and inlet air make heat exchange in it and make the finished air a better temperature for the final use. Some supplier omit this step.
Email:jovelyzou@hzsljh.com
website: www.slairdryer.com
