Shanli Air-cooled refrigerator air dryer (SLAD-80NF)
- Model
- SLAD-80NF
Item specifics
- Air inlet temperature
- ≤45°C
- Cooling way
- Air-cooled
- Ambient temperature
- ≤38°C
- Pressure dew point
- 2~10°C
- Air inlet pressure
- 0.6~1.0MPa
- Pressure loss
- ≤3% of inlet pressure
- Place of origin
- Hangzhou, China
- Configuration
- Stationary
- Warranty
- 1 year
- Color
- depend on requirement
Review
Description
Features
1. Max air inlet temp:50℃;
2. Economic and convenient,no water system required;
3. Highly efficient moisture separation with patented design water separator;
4. Patented design in water separator which 99.9%water be separated;
5. Refrigerant compressor: Danfoss, Performer, Bitzer, Copeland, Maneurop, Fusheng;
6. Refrigerant control: Danfoss, Emerson, Sprolan;
7. Low noise,running stable,energy saving and long life;
8. Real time display operating parameters.
Refrigerated Compressed Air Dryer | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Model | Flow Capacity (Nm3/min) | Voltage (V) | Fan Power (W) | Pipe Diameter | Air Inlet Pressure (Mpa) | Net Weight (Kg) | Length (mm) | Width (mm) | Height (mm) | Air Flow (N3/h) |
SLAD-0.5NF | 0.65 | 220 | 1x67 | G1/2" | 0.6-1.0 MPa | 45 | 750 | 430 | 610 | 760 |
SLAD-1NF | 1.2 | 220 | 1x67 | G1" | 70 | 780 | 450 | 610 | 760 | |
SLAD-2NF | 2.5 | 220 | 1x95 | G1" | 110 | 800 | 460 | 720 | 1580 | |
SLAD-3NF | 3.6 | 220 | 1x150 | G1" | 130 | 950 | 480 | 720 | 3150 | |
SLAD-4.5NF | 5 | 220 | 1x240 | G1 1/2" | 150 | 1170 | 540 | 750 | 5580 | |
SLAD-6NF | 6.8 | 220 | 2x150 | G1 1/2" | 160 | 1350 | 520 | 753 | 6300 | |
SLAD-8NF | 8.5 | 220 | 2x195 | G2" | 200 | 1100 | 670 | 1098 | 8470 | |
SLAD-10NF | 10.9 | 380 | 2x195 | G2" | 250 | 1200 | 670 | 1098 | 8470 | |
SLAD-12NF | 12.8 | 380 | 2x195 | G2" | 300 | 1200 | 670 | 1048 | 8470 | |
SLAD-15NF | 16 | 380 | 2x190 | DN65 | 320 | 1460 | 750 | 1630 | 8470 | |
SLAD-20NF | 22 | 380 | 2x240 | DN65 | 420 | 1670 | 800 | 1663 | 11160 | |
SLAD-25NF | 26.8 | 380 | 2x240 | DN80 | 550 | 1820 | 800 | 1713 | 11160 | |
SLAD-30NF | 32 | 380 | 2x380 | DN80 | 650 | 1900 | 860 | 1875 | 15240 | |
SLAD-40NF | 43.5 | 380 | 3x240 | DN100 | 2200 | 2200 | 930 | 1941 | 16740 | |
SLAD-50NF | 53 | 380 | 3x380 | DN100 | 2450 | 2450 | 900 | 2110 | 22860 | |
SLAD-60NF | 67 | 380 | 4x380 | DN125 | 2140 | 2140 | 1450 | 1787 | 30480 | |
SLAD-80NF | 90 | 380 | 4x550 | DN125 | 2070 | 2070 | 1600 | 2029 | 42400 |
1. By-bass valve. Some domestic suppliers don't have it.
2. 3-stage separation patented design in water separator. Direct colliion type, low speed centifugation and stainless wire demist. The result is 99% separation efficiency.
3. Heat exchanger design. The finished air and inlet air make heat exchange in it and make the finished air a better temperature for the final use. Some supplier omit this step.
Email:jovelyzou@hzsljh.com
website: www.slairdryer.com